Differbetween
Unlike the Passenger tires, the Light Truck ones are used for carrying more loads. LT tires have a load range of 10 ply, whereas P tires only have a 4 ply load range. Light Truck tires are made of more aggressive treads than the Passenger type tires. LT tires will give a more stable feeling on the roads.
- Are LT tires better than P tires?
- Are P and LT tires interchangeable?
- What does P or LT mean on a tire?
- Does the P matter in tire size?
- What does P stand for in tires?
- Are LT tires necessary?
- What does LT mean in tires?
- Will 10 ply tires last longer?
- What is the difference between 255 and 275 tires?
- What does the T or H mean on tires?
- What does LT mean on a Silverado?
- Are LT tires more puncture resistant?
Are LT tires better than P tires?
Usually, LT tires have deeper tread depths than their P-Metric counterparts. Officially, LT tires should always be replaced with LT tires. P-Metric tires are passenger tires that are better suited for on-road use. ... If a P-Metric tire size is chosen, the tires should be able to carry at least 1,238 pounds.
Are P and LT tires interchangeable?
P-metric to LT is acceptable, but never replace original equipment LT tires with P-metric tires due to them having lower load capacity ratings at maximum air pressure. If you drive your truck heavily loaded or pull heavy trailer loads frequently, you should consider replacing your p-metric tire with an LT tire.
What does P or LT mean on a tire?
If there is a "P" on the sidewall, it stands for "passenger car." This refers to the U.S. (P-metric) method of tire sizing. "LT" stands for Light Truck, "ST" is for Special Trailer and "T" stands for Temporary, which is primarily used for small spare tires.
Does the P matter in tire size?
Physically, they have about the same dimensions and appear to fit interchangeably, but you will notice a difference in the two- or three-digit number following the size called the load index. The higher the load index, the greater the load-carrying capacity of the tire.
What does P stand for in tires?
P identifies your tire as a Passenger Tire. The P stands for PMetric. If your tire size starts with LT rather than a P than it identifies the tire as a Light Truck tire. 225 identifies the tire section width, which is the measurement of the tire from sidewall to sidewall in millimeters.
Are LT tires necessary?
If you have a ¾-ton or 1-ton pickup truck, you need Light Truck tires, because they offer the proper load carrying capacity for your heavy vehicle and its cargo. Passenger tires simply aren't built to handle the weight of large vehicles, and using them for this application could potentially be dangerous.
What does LT mean in tires?
If a tire size reads, LT235/75R15 104/101S, the LT indicates that this tire is meant for Light Truck use. These tires are made for light-duty and heavy-duty pickup trucks (typically ½ ton, ¾ ton, or 1-ton load capacity), SUVs and vans.
Will 10 ply tires last longer?
most 10 ply tires have a harder rubber compound and will last longer than a 6 ply tire.
What is the difference between 255 and 275 tires?
275/70/18 would be be 1 inch taller and 3/4 inch wider than the 255.
What does the T or H mean on tires?
All these ratings cover speeds well above legal limits. The most popular, S, T, and H, are rated for 112, 118, and 130 mph, respectively. Traditionally, most family cars have used S- and T-rated tires, while tires rated H and higher have mostly been available only in sports cars or upscale sports sedans.
What does LT mean on a Silverado?
LT = Luxury Touring. LTZ = Luxury Touring Z. The Z represents it is the highest trim level. Some of the other newer trim levels have meanings too.
Are LT tires more puncture resistant?
LT tires are stronger when compared to the P rated tires. -due to the tire having more tread ply's and in some cases even more sidewall tread ply's you can get higher load ratings and more tire durability. ... If a high load rating or tire resistance to punctures is high on your list LT rated is the best option.
