The main difference between a bleed and a slug is their respective functions. ... A bleed usually consists of objects and texts while a slug is most often in text form. Also, a bleed (particularly an unintentional bleed) and a slug are intended to be removed before the final version is printed or published.
Slugs, or slug lines, are also the name for incidental typeset lines of type that are intended either for the printer's or binder's benefit (such as a collation mark, a catch line, or a galley slug) or as advertising for the producer of the printed piece (such as a line of type showing the name of the printer, the ...
accommodate printer's marks, bleed (the parts of text or objects that extend. past the page boundary to account for slight inaccuracy when trimming), or. slug area (an area outside the page and bleed that contains printer. instructions or job sign-off information).
Bleed refers to a background color, graphic, or image that extends to the edge of the finished paper size and beyond. ... In contrast, a piece with no bleed keeps all the printed elements a minimum of . 125" (3mm) away from the edge of the paper on all four sides. Nothing is printed to the finished edge of the paper.
A Bleed acts as a margin of error when the document is trimmed, after it's been printed. So, if you have any content that will cross the edge of the page, such as a coloured background or maybe an image, you should extend it into the bleed to avoid any white lines appearing around the edge of your document.
But slugs/snails and most other mollusks have blood that is called HEMOCYANIN. The proteins in slug blood carry COPPER atoms instead of iron. They too attract oxygen. The copper gives the blood a bluish green color.
The minimum amount of bleed should be around 0.125" (3mm) outside your document final size, ideally 0.25" (6mm). Each printer has his own requirement for this. The only time you don't need to use bleed is when there is absolutely nothing printed on all sides (eg.
Slug: The slug is an optional space that a designer can add to a document that can be displyed but is not intended to be printed.
You can always add a bleed area to your document later, or edit bleed settings you entered previously. Choose File > Document Setup. Click Bleed and Slug to expand it, and then enter your values.
In WordPress, the slug is the part of your URL that you can edit when writing a new post. Editing it in WordPress looks like this: Note that this only works with the right permalink settings. You can edit the permalink settings in WordPress through Settings > Permalinks.
To ensure your print job will not have any white lines it is important that you include a bleed when designing. This means that any image or text or background colour that you intent to touch the edge of your page should have a bleed to ensure it goes to the edge of your page when being printed.
Bleed is defined as to lose blood, suffer a wound, ooze or for color to come off or through. An example of bleed is for a scraped knee to ooze blood. An example of bleed is for the dye on a red shirt to transfer onto a white shirt while washing in hot water.
The way to create bleed is to simply make certain that the image or graphic extends off the edge of the page to a distance of 1/8" (. 125) wherever you want something to bleed. 125" bleed directly into your document. ... For example: if the final size is 8.5" x 11" then make your document 8.75" x11.