Difference Between HDPE and MDPE

The key difference between HDPE and MDPE is that HDPE has a high sensitivity to stress cracking whereas MDPE has better stress cracking resistance when compared to HDPE. The terms HDPE stands for high density polyethylene while the terms MDPE stands for medium density polyethylene.

1. What is Mdpe used for?
2. Which is better PE80 and PE100?
3. What is the difference between low and high density polyethylene?
4. What are the disadvantages of HDPE?
5. Is Mdpe a code for pipes?
6. Can I use blue Mdpe above ground?
7. What does PE 80 mean?
8. What is PE 80 in HDPE pipe?
9. What is PE 100 in HDPE pipe?
10. Is HDPE heat resistant?
11. Is LDPE cheaper than HDPE?
12. Why does HDPE have a higher density?

What is Mdpe used for?

The most common type of pipe and fitting material now used to connect water mains to homes is MDPE. MDPE stands for medium-density polyethylene, and is a robust, heavy duty material. MDPE pipes that are used to connect mains water supplies into homes are typically installed in underground trenches dug in virgin ground.

Which is better PE80 and PE100?

PE100 also has a higher strain hardening modulus than PE80, suggesting that the former is better in the resistance to deformation. In addition, viscous stress and quasi-static stress of PE100 are higher than those of PE80. However, PE80 has a better resistance to relaxation.

What is the difference between low and high density polyethylene?

Although both materials are polyethylene, they do have different properties. LDPE is softer, more flexible and melts at a lower temperature than HDPE. LDPE is used in sandwich bags and other types of packaging. HDPE is harder, has a higher chemical resistance and can withstand higher temperatures.

What are the disadvantages of HDPE?

The Disadvantages of HDPE Include

• Poor Weathering.
• Highly Flammable.
• Sensitive to Stress Cracking.
• Not Biodegradable.
• Can't Be Composted.
• Not Resistant to Oxidizing Acids.
• Not Resistant to Chlorinated Hydrocarbons.
• High Thermal Expansion.

Is Mdpe a code for pipes?

Cflow BLUE MDPE Pipes, IS Code: ISO 4427, Thickness: 3 mm.

Can I use blue Mdpe above ground?

Blue MDPE pipe may be used above ground in situations where it is not exposed to light and is protected against: undue warming. freezing. potential contamination from the environment.

What does PE 80 mean?

PE80 has been widely used for gas, water and industrial applications for many years and is most commonly named MDPE (Medium Density Polyethylene). However, PE80 could also be HDPE (High Density Polyethylene). PE80 pipes are often rated SDR11 PN12 and have a minimum required strength (MRS) of 8.0MPa (Megapascal).

What is PE 80 in HDPE pipe?

PE 40 - low pressure piping systems. PE 63 - medium pressure piping systems - irrigation system - drinking water connections. PE 80 - gas pipe for natural gas distribution network with pressure rate up to 4 bars - drinking water pipe with pressure rate up to 16 bar - sewers, outfall pipes, industrial pipes.

What is PE 100 in HDPE pipe?

PE100 is the third generation of pipe grade PE.

It has an optimum balance of three key properties: Minimum Required Strength (MRS) – this provides long-term strength and creep resistance.

Is HDPE heat resistant?

HDPE has greater stiffness, rigidity, heat resistance, and increased resistance to permeability than LDPE. ... HDPE has a working temperature of 212 degrees F - 220 degrees F under low load conditions and it may be autoclaved at sterilizable temperatures.

Is LDPE cheaper than HDPE?

On the flip side, HDPE doesn't have much branching going on. The molecules are tightly packed together during crystallisation, making HDPE dense and possessing higher resilience than LDPE.
...
In a nutshell: the chemistry of LDPE and HDPE.

Why does HDPE have a higher density?

That is why HDPE have a higher strength-to-density ratio than LDPE with an increased tensile strength.
...
Properties of LDPE and HDPE.